Центр продуктов

+
  • undefined

ZP-25 Special Tablet Press for Effervescent Tablets

This machine is a tablet press specially developed by our company. It adopts a unique demolding method for tablets with strong viscosity and difficult demolding to ensure that the compressed tablets are smooth, beautiful and beautiful. It is used to produce effervescent tablets, Ideal equipment for viscous disinfectants and other tablets.

приложение:

Ключевые слова:

Описание продукта

Tablet press use:

This machine is a tablet press specially developed by our company. It adopts a unique demolding method for tablets with strong viscosity and difficult demolding to ensure that the compressed tablets are smooth, beautiful and beautiful. It is used to produce effervescent tablets, Ideal equipment for tablets such as viscous disinfectants.

Rotary tablet press is specially developed for materials with high sugar content and easy sticking. This machine is a special tablet press for pressing effervescent tablets in the current pharmaceutical industry.

At present, there are two methods for pressing effervescent tablets in the world: one is to spray magnesium stearate for nails during the production process of the tablet press. The other is die rotation. The effervescent tablet press produced by our company is the second type.

This machine has the ability to rotate the upper and lower dies for about 30-40 degrees when the upper and lower dies are under pressure (without fully decompression) during the production of tablets, and the fine powder on the studs is made by rotating the upper and lower dies. Twist and press onto the sheet to make the upper and lower punches in a bright and normal state.

For this reason, our company applied for and obtained three product patents on the effervescent tablet press machine.

Features:

1. This model is specially designed for powders with strong viscosity, poor fluidity, damp, and high humidity. It is an excellent choice for high-humidity suppression environments.
2. The equipment is made of stainless steel and meets GMP requirements.
3. Using frequency conversion speed regulation method, adjust the speed according to different tablets.
4. The outer cover is fully enclosed, the upper half is enclosed by the window, and the lower half is enclosed by stainless steel. The pressing studio is isolated by a stainless steel cover at the part contacting the machine parts, which can maintain the surface gloss and prevent cross-contamination. Claim.
5. It is equipped with a transparent glass window, which can clearly observe the pressing state. The window is supported by a gas spring. When the doors and windows are opened, they can directly contact the internal parts of the machine, which is convenient for operation and maintenance.
6. This machine is a single compression tablet press.
7. This machine adopts feeding hopper and moon-shaped grid feeder as the main feeding device. When installing and feeding the feeder, pay attention to the gap between the bottom surface and the turntable, which can be adjusted by the pillar; the powder amount adjustment is provided by a knob on the top of the hopper frame. Used to adjust the height of the hopper to control the flow of powder. The forced feeding method can also be used, depending on the characteristics of the raw materials on the demand side. This machine is equipped with separate high-efficiency dust removal equipment, which has high dust collection efficiency and ensures the normal operation of the machine.
8. Equipped with overload protection device, when the pressure is overloaded, the power-off protection device can automatically stop.
9. This machine complies with the JB20020-2004 industry standard and also complies with GMP requirements.

Technical Parameters

Serial number

Name

Unit

Index

1

Turntable punching modulus

vice

25

2

Maximum compression force

Thousand cattle

100

3

Maximum tablet diameter

Mm

25

4

Maximum tablet thickness

Mm

3-11

5

Maximum filling depth

Mm

10-25

6

Turntable speed

Rpm

20

7

Tablet production

Ten thousand pieces/hour

30000

8

Working diameter of turntable

Mm

420

9

Die diameter

Mm

40

10

Middle mold height

Mm

twenty two

11

Diameter of upper and lower punch

Mm

29

12

Length of upper punch

Mm

145

 

Length of lower punch

Mm

155

13

Machine dimensions (length * width * height)

Mm

1230*950*1800

14

Machine net weight

kg

2000

15

power

kilowatt

5.5

16

Voltage

Volt

380

 

Предыдущий

Следующий

Предыдущий

Следующий

Решение

Готовые решения для вашей отрасли на ваш выбор